Description:

• 600/3/60 by a transformer in the base of the machine
•  0.4-3mm edgebanding thickness for straight or softformed edges
•  Panel height: 7-60mm
•  85mm minimum workpiece width for panel thickness 7-22mm
•  125mm minimum workpiece width for panel thickness 60mm
•  Panel overhang: 50mm
•  20mm maximum profile depth top
•  15mm maximum profile depth bottom
•  Adjustable infeed fence with digital readout
•  Inflatable top pressure wheels and support skates for small part handling
•  HOMATIC "NC 21" controller
•  Real time OS9 operating system in Windows environment
•  PC compatible keyboard
•  10.4" LCD flat screen display
•  Ethernet network connection
•  Storage of 40 working programs each with up to 160 functions for remote control of processing units
•  Feed track: 80mm with central automatic lubrication
•  Feed drive: 5 HP, variable feed speed
•  950mm pass-line height
•  Powered raising and lowering of upper pressure beam, with powered double wide compound v-belt type holddown
•  Universal trimming unit: two (2) 4 HP (9000 RPM) tiltable milling/profiling heads . The first head has electropneumatic control for intermittent trimming and swiveling
•  Panel blow-off device
•  Selectable rotation switch
•  SIKO digitals for vertical and horizontal adjustments
•  "QE-34" pre-melt granular hopper complete with automatic sensor to control melting quantity. Reversible DC drive for heated glue application roller
•  "HL 20" strip and coil feed edgebanding magazine for 3mm thick maximum coil banding and strip feed, with six (6) magazine vertical coil holder
•  Heavy duty 3mm guillotine
•  Revolver pressure section for five (5) stations, includes one (1) pressure zone for straight edges, four (4) pressure roller and shoe sets for various softforming profiles. A cooling blower at the end of the pressure zone and an sir jet for cleaning panel overhang area
•  End snipping unit with two (2) 0.53HP (12000 RPM) motors. Chamfer or straight cutting selection. Manual lateral setting for 28mm maximum softforming depth.
•  "FF11" model top and bottom rough trimming unit with two (2) 2HP (12000 RPM) non-tiltable motors
•  "FF12" model top and bottom fine trim/profile unit with two (2) 0.5HP (12000 RPM) motors, tiltable 0° to 30° thickness
•  Top and bottom tilting buffers
•  All trim station motors are 200 cy HF and equipped with electronic frequency inverter for control of motor speed and braking. Workstations with SIKO digital readouts
•  One (1) 300 Hz, 10 KVA frequency inverter
•  One (1) 100 Hz, 12 KVA frequency inverter
•  Adjsutable outrigger panel support up to 31 1/2"
•  Four (4) floor supports
•  Outfeed support for small work pieces
•  Sound enclosures with windows over tenoner section and all trim stations in edgebanding section
•  Footprint is 35` X 6` X 6.5`. 6 coil tape holder/feeder is outside of foot print.