Description:

• Machine comes with a good Doucet return conveyor currently in storage, thus no picture.
• Machine was placed outside ONLY for the time to take pictures. It is currently out of service and thus without space for pictures to be taken inside
• Can be transformed to clients required electrics. Currently with a transformer for 600/3/60
• Powered top pressure rise and fall
• Powered double "V" belt top pressure
• Homatic NC 21 Windows compatible programmable controller
• Pictogram diagnostics on controller screen
• Telephone trouble shooting
• Electronic frequency converter on all machining heads
• Sound enclosure for all machining heads
• WK03 double motor high speed end trims for straight or angle cutting with pneumatic changeover
• Free space for fitting of addition units
• Outrigger support adjustable to 800mm -Dust extraction through the base of the machine
• Back-off of glue roller and edging feed in case of feed chain stop
• 80mm (3.15") wide rubber covered feed chain on hardened guideways
• Magnetic braking on the feed motor
• Feed from 18 to 24m/m (59 to 79`/m)
• Minimum working width 55mm
• Maximum part overhang of 30mm
• Part thickness 12 to 60mm
• Coil edging from .3 to 3mm
• Maximum coil diameter of 830mm
• QA34 gluing unit
• Granule glue reservoir
• Electronic glue temperature control
• Reversible glue applicator roller
• 2 vertical coil edging magazine with automatic changeover on completion of a coil
• Pneumatic pressure roll section with 1 powered pressure roller 150mm diameter and 2 idle rollers 70mm
• 12,000rpm angled or straight end trims -2 powered rubber in-feed rollers angled toward the fence line
• KL70 automatic chain lubrification
• 3.5mm maximum edge thickness
• 350mm between panels
• 2 X .55kw 12,000rpm top and bottom rough trim unit
• Height adjustment with top pressure beam
• 2 X .4kw 12,000rpm top and bottom fine finish trim units
• Profile scrapers for edge thickness up to 5mm, fitted with 3mm knives
• Top and bottom oscillating buffers
• Top buffer adjusts for height with top pressure beam