Description:

• Left handed machine
• CSA components
• Control voltages or 24V and 230V
• Program controlled 6 to 30 meters/min feed speed
• Program controlled lubrication of feed chain
• V belt top pressure
• Outrigger panel support
• PC based control system with integrated PLC operating in Windows 2000 Professional with almost unlimited program memory - Keyboard/mouse inputting - Tool data admin. and offset - In-line capability - Ethercat communication - Prepared for teleservice - 15" monitor
• CSA components
• Safety and sound enclosures over working units
• Electromechanical adjustment of top pressure beam
• WORKING UNITS
• Space for anti stick solvent applicator
• 2 motor 9000RPM pre-mill with opposite rotation - 1st motor jumping - air blower to clean panel edge
• Gluing station with pre-melt and additional glue storage 30 kg via pump to pre-melt - .3 to 3mm edging thickness - 1 driven and 4 idle pressure rollers - 2 reel, quick changeover, 850mm capacity feed reels for up to 30mm edging
• High speed end trim - Swivelling 0 to 25 degrees for straight and chamfer trimming - Max edging cross section of 12X60mm - Min panel length 130mm - Min distance between panels is 300mm
• Top/bottom 12,000RPM stacked rough trimming motors - Tilt to 3 degrees
• Top/bottom 12,000RPM offset fine trimming motors - Tilt to 30 degrees
• Space for profile scrapers
• Self tracing and jumping top and bottom glue scrapers with 2 air nozzles for scraper cleaning
• Top and bottom 1,400RPM buffing motors
• Space for sanding unit
• Control cooling unit