Description:

• Equipped with Electronic Line Control.
• 36 FPM feed speed.
• Joint Trimming Unit.
• Automatic height adjustment with top pressure beam for all work stations.
• Equipped with digital height indicator for setting of upper pressure beam.
• Control panel located at machine infeed for operator convenience.
• Large coil table (800 mm diameter) to accommodate 3mm PVC coils. Automatic magazine for strip and coil feeding.
• Hotmelt granulate glue application system with approximately 12 minute heatup time. Automatic reduction of glue temperature if not run within 15 minutes. This feature lowers the temperature to approximately 150 degrees C. Re-heat time is approximately 2 minutes. Reversible glue roller application.
• Strengthened pre-cutter for cutting 3 mm PVC from the coil.
• First pressure roller driven and one idle pressure roller equipped with digital setting system.
• Double motor end trim unit for precision trimming with tilt range from 0 ﾖ 15 degrees.
• Top and bottom fine trimming unit equipped with digital counter for easy changeover. Tiltable from 0 - 15°. Includes combination straight/3 mm radius insert cutters.
• Sound enclosure with window.
• Price Includes Joint Trimming, End Trimming, Fine Trimming, Scraping and Buffing Units!
• Equipped with scraping unit with top, bottom and side tracing device for finishing thick (primarily 2mm or 3mm ) PVC edges.
• Top and bottom buffing unit.
• Workpiece support track extendable to 19.5" ( 500mm ).
• Electronic frequency changer for all trimming motors, which also includes electronic motor braking.
• Electrical components according to UL/CSA listings.

• Edgeband thickness - strips - coiled material 0.4 - 3 mm (0.016" - 1/8") (max. 3 x 45 mm, 0.8 x 55 mm) 0.4 - 3 mm (0.016" - 1/8") (max. 3 x 30 mm) (max. 0.8 x 55 mm)
• Edgeband length Strip material: 229 mm (9") min
• Panel length min. 140 mm (5 1/2")
• Panel width min. 60 mm (2 3/8")
• Panel thickness - min. - max. 8 mm (5/16") 50 mm ( 2")
• Feed speed 11 m/min (36 FPM)
• Joint trimming unit Cutting speed 2x 2.2kw ( 3 HP ) ea 12,000 RPM
• End trim unit - two motors End trim cutting speed Tilting range 0 ﾖ 15 degrees 0.18 kw (.25 HP ea) 12,000 RPM
• Flush trimming unit Cutting speed Tilting range 0 ﾖ 15 degrees 0.27 kw (.33 HP ea) 12,000 RPM
• Machine length 3550 mm (11' 7")
• Machine width, max. 1145 mm (45")
• Working height 850 mm (33 1/2") Total height 1365 mm (53 3/4")
• Machine net weight 1100 kg (2420 lbs.)
• Amperage: 40 amps @ 230 volts, 20 amps @ 460 volts. Total power required: 9.5 kw. Electrical connection: 208/230/440/480 volt, 3-phase, 60 Hz.
• Dust extraction: 1x 120 mm ( 4" ), 1x 100 mm (4"), 1400 CFM. Compressed air connection: 0.18 CFM per panel, 6 bar (85 PSI).