TMW Machine: #662
Manufacturer: Black Brothers
Model: AS2000 SPF
Voltage: 460V 60Hz 3Ph
Condition: Good Condition
Price: Call for Price
Reconditioned Black Brothers Laminating Line 5' x 12'
Automated so one man can run the line from front to back.
- Index Station with Rack
- Tyler Pod Press
Automatic Panel Pusher:
- 4000 Lb Scissorlift: Rises incrementally as each piece leaves enters the panel cleaner. 3' x 8' Bed accepting sizes up to 5' x 12'. Bed size can be altered to match product. Vertical posts, opposite loading side, index panels for accurate loading into cleaner.
- Pneumatic cylinder drives each panel into the panel cleaner. A sensor at the end tells the arm when to stop and retract. Another sensor tells the scissorlift to raise preparing for the next panel to load. The arm is adjustable for panels between 8' and 10' in length. Accepts any panel width.
- EVANS Top and bottom panel cleaner eliminating 99% of debris from panels dramatically reducing waste due to telegraphing.
- 62" Working width (2) 8-1/2" Diameter Tampico brushes
- 1-1/2 HP Single speed feed at 80 FPM Brush speed (750 RPM)
- 0 to 3" Upper opening Numerical digital readout
- (2) 6" Diameter dust outlets
- All necessary electrical controls.
- Completely Reconditioned.
- BLACK BROS 22D 875 (68 or74) Glue Spreader
- 68" - 74" Working width
- 8-3/4" Dia. rubber coated rolls
- 6-1/2" Dia. rubber coated doctor rolls
- Upper elevator opening 0" - 4-1/2"
- Single speed of 88 FPM with 1.5 HP drive
- NEMA 12 electrics
- Push button magnetic starter
- Safety guards
- Safety reversing bar
- All warning labels.
- Completely Rebuilt from ground up.
- Walkway for operator to move along line while processing panels. The catwalks include grate type walk areas and stairs. Complete railings to reduce injury and satisfy OSHA standards.
- 5' x 12' Capacity
- Operator places the bottom laminate on the scissorlift. Material leaves glue spreader with adhesive on both sides riding on slanted roller that supports the outer edges until the panel completely leaves the spreader. A switch at the end of the table activates the rollers to move out of the way, dropping the panel cleanly onto the laminate. The operator removes a top and bottom pieces of laminate from the rack and places them on the panel. He activates the scissorlift dropping one position allowing room for the next substrate to leave the spreader.
Pneumatic Laminate Rack:
- 4000# Scissorlift with 3' x 8' bed.
- Gravity rollers attached to the top allows operator to move a bundle down into the press when completed.
- Lift incrementally lowers one panel thickness by hand control (or footpedal) after each panel is loaded.
TYLER 5 X 12 AIR BAG COLD PRESS with MOTORIZED ADJ DAYLIGHT:
- Holds laminate ready for application to substrate.
- Sits above Index Table opposite operator.
- When the operator is ready to apply the next sheets of laminate he activates a footpedal moving the rack forward mechanically. Once rack is in the forward position he holds the pieces he requires and taps the pedal again returning the rack to it's original position, and having the pieces of laminate drop onto the Index Table in the appropriate placement.
- Total press size: 62" x 146"
- End loading on 62" side
- Single upper platen
- Approx. (6) air bags generating 80 PSI specific pressure
- 0" To 84" Motorized adjustable daylight.
- Modified to press 4x8 or 5x12 panels.
- Gravity infeed conveyor allows manual movement of material to cold press for loading. Conveyor is 13' long allowing operator to stage a bundle for loading or to change to a cart system later if more presses are added to the line.
- Operator pushes bundle from press onto gravity conveyor. Conveyor has forklift slots to lift the completed bundle and remove it from the line.
ALL MACHINERY CLEANED, CHECKED and PAINTED to match. Glue spreader and panel cleaner completely reconditioned.
Installation and training availabe at an additional charge.