Description:

• -This machine was installed new by Giben America in November 2000. It is a 1 owner machine.
• -3800mm (12` 6") cut line
• -3800 (12` 6") X 1600mm (5` 3") lift table driven by a 4.8HP rise and fall motor
• -2 powered roller modules in lift table
• -720mm (28") bunk capacity with lift table on the floor
• -132mm (5.2") saw blade projection
• -Pusher by servo motor on high precision rack and pinion
• -Pusher advancing from 1 to 60m/m (3 to 197`/min)
• -Pusher returns at 60m/m (197`/min)
• -8mm (.31") minimum thickness for automatic loading from lift table
• -11 support roller modules under the pusher
• -8 floating 117mm (4.6") opening grippers
• -Raising grippers on return
• -Double full length pressure beam
• -Four 2000 X 510mm (78.7 X 20") air tables
• -Air flotation sliding shelf positioned between the first two table on the fence side
• -30HP main motor with 470mm (18.5") diameter blade
• -3.5HP scoring motor with 215mm (8.5") blade
• -Rapid change tooling on main and scoring
• -Remote scoring adjustment from the G-Drive controller with blades in motion
• -AC brushless saw traverse motor advances from 1 to 130m/m (3 to 427ft/min)
• -Saw carriage return at 130m/m (427ft/min)
• -Automatic pre-positioning side aligner with double independent rollers
• -Klockner Moeller PLC
• -One 200mm (7 7/8") lower and two 115mm (4 1/2") upper extraction outlets
• -Ammeter for main saw motor
• -Automatic saw blade height adjustment depending on book height
• -G-Drive PC based controller
• -Real time graphics
• -15" VGA color monitor
• -Memory capacity for 999 different jobs, each with 99 patterns, each with up to 52 sizes, each repeatable up to 99 times
• -RS-232 data port for downloading cutting patterns from an office PC
• -Battery backup for 30 days