beam saw arranged as follows.
-max. cutting width 131.8"
-max. cutting depthm front to back 128"
-max. saw blade projection 3.7"
-max. clamp opening 3.5"
-main saw motor 15KW (20hp)
-main saw blade dia. 350mm X 30mm bore
-scoring blade dia. 300mm X 30mm bore
-saw carriage controlled by AC servo drive, rack and pinion.
-saw carraige speed 1-120m/min forward, 120m/min return
-cross aligning two independant cams fully automatic with an aligning zone of 2.36" - 86"
-3 air tables with one 0.76hp blower per table.
-pusher and clamps controlled by a freq. converter with rack and pinion, friction-less magnetic tape encoder system.
pusher feed 0-60m/mn/ return 80m/min.
-PC Front-end with "Windows" operating system, keyboard & mouse, 17" color display with SVGA resolution
(displays cutting dimensions & patterns w/moving graphics); virtually umlimited storage capacity, Ethernet
card 10/100 Mbit, 128 MB Ram, 56K modem.
-Integrated graphical self-diagnostic, remote diagnostics by the factory via dedicated phone line; data input by
keyboard or possible direct downloading from office PC; incl. optimization program at saw, automatic grooving
software with no mechanical setup needed.
-SCHELLING "MCS" Saw control software with: "Windows" operating system, simulation of patterns before
actual cutting; graphical representations of cut-to-size parts in production shows the operator what to do with