1999 Homag Optimat KL 74 A3 Edgebanders for Sale | Woodworking Machinery

1999 Homag Optimat KL 74 A3 Edgebanders full machine overview

Powered top pressure rise and fall
Powered double "V" belt top pressure
Homatic NC 21 Windows compatible programmable controller
Pictogram diagnostics on controller screen
Telephone trouble shooting
Electronic frequency converter on all machining heads
Coil feed for material up to 3mm - Sound enclosure for all machining heads
WK03 double motor high speed end trims for straight or angle cutting with pneumatic changeover
Free space for fitting of addition units
Outrigger support adjustable to 800mm
Dust extraction through the base of the machine
Back-off of glue roller and edging feed in case of feed chain stop
80mm (3.15") wide rubber covered feed chain on hardened guideways
Magnetic braking on the feed motor
Feed from 18 to 35m/m (59 to 115`/m)
Minimum working width 55mm
Maximum part overhang of 30mm
Part thickness 12 to 60mm
Coil edging from .3 to 3mm
Maximum coil diameter of 830mm
QA34 gluing unit
Granule glue reservoir
Electronic glue temperature control
Reversible glue applicator roller
2 vertical coil edging magazine with automatic changeover on completion of a coil
Pneumatic pressure roll section with 1 powered pressure roller 150mm diameter and 2 idle rollers 70mm
12,000rpm angled or straight end trims
2 powered rubber in-feed rollers angled toward the fence line
KL70 automatic chain lubrification
3.5mm maximum edge thickness
350mm between panels
2 X 1.5kw 12,000rpm top and bottom rough trim unit
Height adjustment with top pressure beam
2 X .4kw 12,000rpm top and bottom fine finish trim units
Pre-disposition for addition of 3mm profile scrapers
Top and bottom oscillating buffers
Top buffer adjusts for height with top pressure beam