2002 Homag KL 79 Edgebanders for Sale | Woodworking Machinery

2002 Homag KL 79 Edgebanders full machine overview

Single sided edgebanding machine
Panel support with rollers extractable to 1500mm
Additional panel support
Chip channel in machine frame
Glue roller stop and glue container back-off in case of feed stop
80mm wide rubber covered chain with hardened guiding surfaces
Magnetic braking on feed
Motorized "V" belt top pressure
Motorized beam height adjustment with digital readout
Control voltage is 24 volt
Electricals to CE and CSA norms
Line control for remote control of the processing units
PLC with LED display of all inputs and outputs
NC-21 control
OS9 operating system with Windows
On-screen and remote diagnostics
On-screen display of all required manual set-up adjustments
Feed variable 10 to 20m/m
Working height 950mm
Min working width for panels to 75mm thick is 22mm for panels up to 120mm is 60mm
Panel overhang to 40mm
Panel thickness 12 to 60mm
Edge material .4 to 15mm
Edge material on coils to 3mm
Maximum coil diameter 830mm
Electromatic edge blow off device
Pre-heating of work piece and edge prior to gluing
6 roll tape magazine
1 driven 200mm and 6 idle 150mm pressure rollers with single adjustment for edge thicknesses
2 motor end trim .4KW 12,000RPM with 120mm diameter saws with frequency inverter with motor braking
1.5KW 12,000RPM top and bottom rough trimming unit with plug in connections and height adjustment with top pressure and motor braking function
2 motor fine trimming .4KW 12,000RPM with plug type connections and height adjustment with top pressure and swiveling adjustment from 0 to 30 degrees including motor braking function
2 motor fine trimming as above
Pre-wired for universal trimming unit
Pre-wired for profile trimming unit
Sound and dust enclosures
1 .55KW bottom and 1 .55KW top Chamfer/Radius sanding unit for workpieces 12mm thick for sanding belt 2,000mm X 20 to 35mm. Belt speed 7m/sec
Pre-wired for straight sanding unit