Feed speed of 30 FPM. - Equipped with: Operator control panel at eye-level, automatic height adjustment with top pressure beam for all workstations; electronic line control (no limit switches), digital height indicator on holddown beam, electronic motor brakes on trimmers.
0.4 - 3 mm (1/8") Edge thickness cap., 8 - 45 mm panel thickness, 60 mm min. panel width and 140 mm min. length.
Equipped with: Infeed heating shoe to pre-heat panel edge; Hot Melt granulate glue system with fast start-up (10 - 12 Min heat-up) with reversible rotation glue applicator roller and automatic reduction glue temperature adjustment (when idle drops to 150°it takes 2-1/2 Min to re-activate).
3 mm PVC Pneumatic guillotine for coil cutoff, automatic feed magazine, coil stock feeds automatically with guillotine cutoff, all strip stock are fed automatically through strip feed magazine.
2-Roller pressure section (1st driven, 2nd idle) w/electronically controlled & feed speed synchronized drive roll.
Workstations: Vertical travel double motor front & rear end trim with 0° - 15° horz. bevel cap. (0.25 HP - 12,000 RPM motors); top & bottom flush/bevel trimmers (0.35 HP - 12,000 RPM motors), bevel 0° to 15°.
Top & bottom PVC scraping unit for up to 3 mm radius; Last Station: Top & bottom buffing unit (0.15 HP - 2,750 RPM motors).
0.4 - 3 mm (1/8") Edge thickness cap., 8 - 45 mm panel thickness, 60 mm min. panel width and 140 mm min. length.
Equipped with: Infeed heating shoe to pre-heat panel edge; Hot Melt granulate glue system with fast start-up (10 - 12 Min heat-up) with reversible rotation glue applicator roller and automatic reduction glue temperature adjustment (when idle drops to 150°it takes 2-1/2 Min to re-activate).
3 mm PVC Pneumatic guillotine for coil cutoff, automatic feed magazine, coil stock feeds automatically with guillotine cutoff, all strip stock are fed automatically through strip feed magazine.
2-Roller pressure section (1st driven, 2nd idle) w/electronically controlled & feed speed synchronized drive roll.
Workstations: Vertical travel double motor front & rear end trim with 0° - 15° horz. bevel cap. (0.25 HP - 12,000 RPM motors); top & bottom flush/bevel trimmers (0.35 HP - 12,000 RPM motors), bevel 0° to 15°.
Top & bottom PVC scraping unit for up to 3 mm radius; Last Station: Top & bottom buffing unit (0.15 HP - 2,750 RPM motors).
Manufacturer
Brandt
Model
KDN 340
Year
2005
Condition
Good
Detailed specifications are available upon request.
Request Specifications
Nationwide Freight
We arrange transport to any location in the continental United States. International shipping available on request.
Rigging & Loading
We can assist coordinating rigging crews and flatbed or step-deck carriers for heavy equipment.
Customer Pickup
You're welcome to inspect and pick up the machine in person. Contact us to schedule.
All specifications are subject to buyer verification. The Machine Warehouse, LLC is not responsible for errors or omissions.
