Edge capacity: 0.4 - 8 mm (5/16");
Panel thickness 15/32" - 2-5/32";
Min. panel length 160 mm (6-3/8") and 65 mm (2-1/2") min. width;
line control (NO limit switches) for workstation function.
PC-16 Program Control; with 7-1/2" VGA screen 8 MB IDE flash disk, 8 MB RAM, Internal Modem for remote diagnostic link;
Signal infeed light to insure proper spacing between panels.
Glue applicator roller is reversable and retractable from the fence line.
Automatic magazine for strip & coil.
3 mm PVC guillotine;
(1) drive plus (1) split secondary roller pressure sections.
Workstations: End trim (1/3 HP - 12,000 RPM motors), chamfers 0° - 15°via programmable controller;
Top & bot. flush/radius trim, bevels 0° - 15° (1/2 HP - 12,000 RPM motor);
Top & bottom scraping for 3 mm radius with servo control indexing system;
Single motor corner rounding.
Top & bottom buffing (0.25 HP - 2,800 motors).
End trim & flush trim stations have HF motors w/electronic brakes;
Feed chain track speed 36 FPM, 2 HP feed drive.
Complete with: Operator control panel w/PLC (Programmable Logic Control) keypad & LED readouts, and used tooling.
Panel thickness 15/32" - 2-5/32";
Min. panel length 160 mm (6-3/8") and 65 mm (2-1/2") min. width;
line control (NO limit switches) for workstation function.
PC-16 Program Control; with 7-1/2" VGA screen 8 MB IDE flash disk, 8 MB RAM, Internal Modem for remote diagnostic link;
Signal infeed light to insure proper spacing between panels.
Glue applicator roller is reversable and retractable from the fence line.
Automatic magazine for strip & coil.
3 mm PVC guillotine;
(1) drive plus (1) split secondary roller pressure sections.
Workstations: End trim (1/3 HP - 12,000 RPM motors), chamfers 0° - 15°via programmable controller;
Top & bot. flush/radius trim, bevels 0° - 15° (1/2 HP - 12,000 RPM motor);
Top & bottom scraping for 3 mm radius with servo control indexing system;
Single motor corner rounding.
Top & bottom buffing (0.25 HP - 2,800 motors).
End trim & flush trim stations have HF motors w/electronic brakes;
Feed chain track speed 36 FPM, 2 HP feed drive.
Complete with: Operator control panel w/PLC (Programmable Logic Control) keypad & LED readouts, and used tooling.
Manufacturer
Brandt
Model
KDN-530-C
Year
2005
Condition
Good
Detailed specifications are available upon request.
Request Specifications
Nationwide Freight
We arrange transport to any location in the continental United States. International shipping available on request.
Rigging & Loading
We can assist coordinating rigging crews and flatbed or step-deck carriers for heavy equipment.
Customer Pickup
You're welcome to inspect and pick up the machine in person. Contact us to schedule.
All specifications are subject to buyer verification. The Machine Warehouse, LLC is not responsible for errors or omissions.
