2006 Brandt KDF-780-2C Edgebanders for Sale | Woodworking Machinery

2006 Brandt KDF-780-2C Edgebanders full machine overview

This machine is still set up and available for demonstration
PC-20 program controller with 256mb of ram, 1gb flash card, 12" screen, USB port and remote diagnostic link
.4 to 15mm edge thickness
2 3/8" maximum panel thickness
6 3/8" minimum panel length
2 3/8" minimum panel width
Machine has line control with no limit switches for workstation timing
Pressure beam height adjustment with digital height indicator
Light signal to schedule in-feed spacing of panels
2 X 3hp 12,000RPM pre-mill with program controlled indexing from straight to bevel
Quick (10min) heat up glue system with quick change pot for glue color changing and maintenance
LED glue temperature indicators for glue pot and application roller
Automatic glue temperature reduction if inactive for 15 minutes
Reversible and retractable glue application roller
800mm diameter support table for 3mm edging and automatic strip feeding
Heavy duty guillotine for 3mm PVC
1 driven and 3 idle pneumatically controlled pressure rollers
2 X 1/2hp 12,000rpm end trim saws that adjust under program control from 0 degrees to 15 degrees
Top and bottom 3/4hp 12,000rpm rough trim heads with insert knives for 3mm pvc
Top and bottom 3/4hp 12,000rpm fine trim heads with servo motor controlled positioning. Horizontal and vertical tracing wheels. Heads bevel from 0 degrees to 15 degrees with insert knives for 3mm pvc
2 X 1/2hp 12,000rpm corner rounding heads for front and trailing corners
Top and bottom 3mm radius scrapers with pneumatically controlled indexing
Top and bottom excess glue scrapers
Top and bottom 1/4hp 2,800rpm oscillating buffers
3hp variable feed motor from 36 to 65fpm
Corner rounding is done at 52fpm
12,000rpm heads have high frequency motors with electronic brakes
Operation control panel with PLC, key pad and LED readouts